Command and response table for dxp sis commands, Command and response table for, Dxp sis commands – Extron Electronics DXP HDMI User Guide User Manual
Page 62
DXP DVI Pro and DXP HDMI Series • SIS Configuration and Control
56
Command and Response Table for DXP SIS Commands
Command
ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Create Ties
NOTES:
•
Commands can be entered back-to-back in a string, with no spaces.
Example: 1*1!02*02&003*003%4*8$
•
The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
•
The DXP switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).
•
The
& tie command for RGB and the % tie command for video can be used interchangeably.
•
To
untie an output from all inputs, enter a tie command in which
X@
= 0.
Tie input
X@
to output
X#
,
video and audio
X@
*
X#
!
Out
X#
•
In
X@
•
All
]
Tie Input
X@
video and audio
to Output
X#
.
Example:
1*3!
Out3
•
In1
•
All
]
Tie Input 1 video and audio to
Output 3.
Tie input
X@
to output
X#
,
RGB only
X@
*
X#
&
Out
X#
•
In
X@
•
RGB
]
Video breakaway
Example:
(See the second bullet point in
the notes above.)
8*4&
Out4
•
In8
•
RGB
]
Tie Input 8 RGB to Output 4.
Tie input
X@
to output
X#
,
video only
X@
*
X#
%
Out
X#
•
In
X@
•
Vid
]
Video breakaway
Example:
(See the second bullet point in
the notes above.)
7*5%
Out5
•
In7
•
Vid
]
Tie Input 7 video to Output 5.
Tie input
X@
to output
X#
,
audio only
X@
*
X#
$
Out
X#
•
In
X@
•
Aud
]
Audio breakaway
Example:
6*4$
Out4
•
In6
•
Aud
]
Tie Input 6 audio to Output 4.
Quick multiple tie
E
+Q
X@
*
X#
%...
X@
*
X#
!
}
Qik
]
Example:
E
+Q3*4%3*5%3*6!
}
Qik
]
Tie Input 3 video to
Output 4, tie Input 3 video to
Output 5, and tie Input 3 audio
and video to Output 6.
Tie input to all outputs, video
and audio
X@
*!
In
X@
•
All
]
Example:
5*!
In5
•
All
]
Tie Input 5 video to all
outputs.
Tie input to all outputs, RGB
only
X@
*&
In
X@
•
RGB
]
Video breakaway
Example:
(See the second bullet point in
the notes above.)
5*&
In5
•
RGB
]
Tie Input 5 RGB to all outputs.
Tie input to all outputs, video
only
X@
*%
In
X@
•
Vid
]
Video breakaway
Example:
(See the second bullet point in
the notes above.)
2*%
In2
•
Vid
]
Tie Input 2 video to all
outputs.
Tie input to all outputs, audio
only
X@
*$
In
X@
•
Aud
]
Audio breakaway
NOTE:
X@
= Input number
0 – maximum number of inputs for your model (0 = untied)
X#
= Output number
1 – maximum number of outputs for your model