Extron Electronics DXP HDMI User Guide - Manual (Page 32)

DXP DVI Pro and DXP HDMI Series • Operation 26
3. To select both video and audio for viewing, press and release the Video and Audio
buttons as necessary until both are lit.
I / O
Until you select an input, the buttons for all untied
outputs light amber if no video or audio inputs are tied,
green if no video inputs are tied (only audio is tied), or
red if no audio inputs are tied (only video is tied).
Press the Audio button
to toggle audio on and
off.
The button lights red
when selected.
Press the Video button to
toggle video on and off.
The button lights green
when selected.
3 8
OUTPUTS
VIDEO AUDIO
1 4 6 7 5 2
Figure 31. Select Video and Audio
4. Press and release the Input 5 button.
The buttons for outputs that are not tied to Input 5
are either unlit or background illuminated.
The output buttons for outputs that are tied to Input 5
light the appropriate color:
Amber for audio and video ties (audio follow)
Green for video ties (video breakaway)
Red for audio ties (audio breakaway)
Press and release the Input 5 button.
The button lights
amber.
1 2 3 4 5 6 7 8
INPUTS
1 2 5 6
OUTPUTS
4 3 8 7
Figure 32. Select an Input to View
5. Press and release the Video button to deselect video.
AUDIO
Press the Video button to
deselect it.
The button is unlit or
background illuminated
when deselected. The Audio button
remains lit
red to
indicate that only
audio is selected.
The output buttons for outputs that are not tied to Input 5
are either unlit or background illuminated.
The output buttons for outputs that are tied to Input 5 light
or blink red to indicate audio ties (audio breakaway).
1 2 3 4 5 6 7 8
OUTPUTS
I / O
VIDEO AUDIO
Figure 33. Deselect Video to View Only Audio Ties