Extron Electronics DVS 605 User Guide - Manual (Page 86)

To clear a Preset:
1. Select the input preset, user preset, or PIP preset
that is to be cleared.
2. Click the Clear button located in the same section
of the screen. A confirmation dialog box opens.
3. Click OK. If the preset is an input preset or a user
preset, the preset is removed entirely from the list.
If the preset is a PIP preset, it is restored to factory
default.
A dialog box opens confirming input clearance.
NOTE: A PIP preset cannot be cleared (deleted). It is restored to factory defaults.
Device Settings Page
This page allows you to configure the device settings associated with audio follow,
IR control, HDCP notification, screen saver settings, and input auto switch enabling.
Click on this button to open the Device Settings page.
Figure 44. Device Settings Page
To set audio to follow the PIP input, select the Audio Follows PIP check box.
To set audio to follow the main input, clear the Audio Follows PIP check box.
To disable IR control, select the Disable IR Control check box.
To re-enable IR control, clear the Disable IR Control check box.
DVS 605 • Using the Default Web Pages 80