Extron Electronics DVS 605 User Guide - Manual (Page 73)

Input/Output Configuration Page — Output Configuration Panel
The right panel consists of user configurable fields for video outputs. These include:
output resolution, refresh rate, signal format and sync polarity for the analog output, and
signal format for the digital output. The switch transition mode between inputs can be
set, and a test pattern selection is available for use in calibrating a connected display. The
genlock settings can also be set on all models.
Figure 35. Input Configuration Panel
Resolution
Click on the arrow and from the drop‑down list box select the applicable output
resolution. The selectable resolutions include five user customizable ones: C1‑C5.
See the
resolution and refresh rate table on page 18 for a full list.
Default is 720p/60 Hz
Refresh rate
Click on the arrow and from the drop‑down list box select the applicable refresh rate.
Analog signal format
Click on the arrow and from the drop‑down list box select an applicable signal format.
Selectable formats are: RGBHV (default), RGBS, RGBcvS, (Y, R‑Y,B‑Y bi‑level), and
(Y, R‑Y,B‑Y tri‑level).
Analog sync polarity
Click on the arrow and from the drop‑down list box select the applicable sync polarity,
Choices are: H‑/
V‑ (default), H+/ V‑, H+/ V+, H‑/ V+.
NOTE: The sync polarity option is only available when the output format is RGBHV.
DVS 605 • Using the Default Web Pages 67