Extron Electronics DVS 605 User Guide - Manual (Page 84)

2. Click and drag the handle of the Gain slider, or click the up > and down < arrows in
the field below the slider, or enter a value in the field.
NOTE: You can only adjust the gain and attenuation for an input that is in analog
or Auto format. Gain only affects analog inputs
To configure audio output format:
1. From the Output Format drop‑down list, select the format of the audio output.
Available formats include:
• Dual Mono
• Stereo
2. Set the audio delay by clicking the up > and down < arrows or entering a value into
the Audio Delay field. Audio delay can be set from 0 ms to 255 ms.
NOTE: The DVS 605 automatically delays audio signals to compensate for internal
video processing
3. Click and drag the handle of the Volume slider, or click the up > and down < arrows,
or enter a value in the field to adjust the audio output volume.
To mute the output audio, click the Mute button below the volume slider. The Mute
button turns red.
DVS 605 • Using the Default Web Pages 78