Extron Electronics DVS 605 User Guide User Manual
Page 55
Command
ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Audio input format
NOTES: •
Selects between analog (5-pole captive screw) or digital (embedded in HDMI input) audio sources.
•
Inputs 1 and 2
X4@
can only be set
to 0 or 1; attempting to set these inputs to a digital format yields an E14 response.
•
Digital auto modes (4 or 5) detect and use embedded audio when present, or analog audio if digital audio is not detected
Set to None
E
IX!*0AFMT}
AfmtI
X!
*0
]
Mutes all audio for input X!.
Set to Analog
E
IX!*1AFMT}
AfmtI
X!
*1
]
Select analog audio for input X! (default
for inputs 1 and 2).
Set to 2Ch digital
E
IX!*2AFMT}
AfmtI
X!
*2
]
Select 2Ch digital audio for input X!
(default for inputs 3, 4, and 5).
Set to Full digital
E
IX!*3AFMT}
AfmtI
X!
*3
]
Select Full digital audio for input X!.
Set to 2Ch digital
auto
E
IX!*4AFMT}
AfmtI
X!
*4
]
Select auto detect audio for input X! (valid
for inputs 3, 4, and 5 only — EDID set to
2Ch).
Set to Full digital
auto
E
IX!*5AFMT}
AfmtI
X!
*5
]
Select auto detect audio for input X! (valid
for inputs 3, 4, and 5 only — EDID set to
Full).
View audio type
E
IX!AFMT}
X4@]
View the audio input type
X4@
for input
X!
.
Audio output format
Set format
E
OX3(AFMT}
AfmtO
X3(]
Set the fixed and variable audio output
format.
View format
E
OAFMT}
X3(]
View audio output format.
Audio follow
Set
E
X4!
AFLW}
Aflw
X4!]
Select audio source (main versus PIP).
View
E
AFLW}
X4!]
View audio source (main versus PIP).
NOTE:
X! = Input selection: 1 to 5
X3( = Audio output format: 1 = dual mono, 2 = stereo (default)
X4! = Audio source: 0 = Follow Main window, 1 = Follow PIP window, 2 = Toggle source
X4@ = Audio input type: 0 = none, 1 = analog, 2 = 2Ch digital, 3 = Full digital, 4 = 2Ch digital auto, 5 = Full digital auto
See X4@ for full variable description
DVS 605 • SIS Communication and Control
49