Extron Electronics DVS 605 User Guide - Manual (Page 22)

To return to the default cycle from within any menu, press the Menu button repeatedly
until the Exit menu appears, then press the Next button. Alternatively, allow the DVS 605
to time‑out (after 20 seconds).
Submenus are accessed from a main menu by pressing the Next button. When within a
submenu, press the Menu button to go out of the submenu and back to the active main
menu.
User Presets
This menu alows the user save or recall up to 16 presets for the selected input, shown as
INx on the LCD screen.
To use this menu press Next to get the relevant submenu, Recall or Save.
When within the submenu use the Adjust knobs to select the preset to save or recall.
Press Menu to exit the submenu.
USER
PRESETS
INx RECALL
Next
Rotate either to
select a preset to
recall settings.
<02>
INx SAVE
Rotate either
to select a preset
to save current
settings to.
Next
Figure 11. User Preset Menu
Picture Control
This menu allows the user to adjust various picture control settings such as horizontal and
vertical window positioning, horizontal and vertical window size, brightness and contrast,
color and tint, and detail settings for the selected input. The selected input is shown as (x)
on the LCD screen.
To use this menu press Next to get the relevant submenu.
When within the submenu use the adjust knobs to select and then adjust the values as
desired.
Press Menu to exit the submenu.
PICTURE
CONTROL
(x)H POS V
+00000+00000
(x)COL TINT
064* *064
(x) DETAIL
*064
Rotate to adjust
color.
Rotate to adjust
tint (* = default). Rotate either to
set detail level
(* = default).
(x)H SIZE V
00000 00000
Rotate to adjust
window horizontal
position.
Rotate to adjust
window vertical
position.
Next Next Next (x)BRIT CONT
064* *064
Rotate to adjust
brightness.
Rotate to adjust
contrast (* = default).
Next
Next Next
Rotate to adjust
window horizontal
size.
Rotate to adjust
window vertical size.
Figure 12. Picture Control Menu
DVS 605 • Operation 16