Extron Electronics DVS 605 User Guide - Manual (Page 82)

PIP presets
Sixteen global PIP presets are available for the DVS 605. A PIP preset contains settings
for the size and position of PIP. It also contains the main and PIP inputs that were active
when the preset was saved. By default the first ten PIP presets have settings already
associated with them, but they can be overwritten.
MAIN MAIN MAIN MAIN
MAIN MAIN MAIN MAIN
PIP PIP
PIP PIP
PIP PIP
PIP PIP
MAIN MAIN PIP PIP
9 10
5 6 7 8
1 2 3 4
Figure 41. PIP Preset Default Window Locations
To create and save a PIP preset:
1. Click the button of an available input (1 ‑ 4) to use as the PIP input.
2. Adjust the picture, size, and position settings as desired for the main and PIP
windows.
3. From the Preset Number drop‑down list in the PIP Presets section, select a
number.
4. In the Preset Name field, enter a name for the PIP preset.
NOTE: PIP preset names have a 16‑character limit.
5. Click Save.
6. Click Yes to overwrite the previous PIP preset.
The settings are saved to the PIP preset location to be recalled at a later time.
To recall a PIP preset:
1. From the Preset Number drop‑down list select the preset to recall.
2. Click Recall to open a drop‑down list from which to select either;
a. Recall: Input, Size & Position (recalls main and PIP inputs as well as
size and position settings of main and PIP windows), or;
b. Recall: Size & Position Only (recalls only size and position settings of
main and PIP windows).
A confirmation dialog box opens.
3. In the dialog box, click Yes.
NOTE: Recalling a preset overwrites any adjustments to the current PIP settings.
DVS 605 • Using the Default Web Pages 76