Extron Electronics DVS 605 User Guide - Manual (Page 74)

Digital output signal format
Click on the arrow and from the drop‑down list box select an applicable signal format.
Selectable formats are: Auto (based on sink/display EDID), DVI, HDMI RGB, HDMI YUV
444 Full, HDMI YUV 444 Limited, HDMI YUV 422 Full, HDMI YUV 422 Limited.
Switch transition
Select either mode, cut or dissolve, to set the transition effect when switching inputs.
Genlock
Where applicable, SDI genlock or input signal genlock can be applied, or genlock can be
turned off. Select as desired.
See “
Genlock/AFL Mode “ on page 20 for details.
NOTE: The SDI genlock option is available only on DVS 605 D and DVS 605 AD
models.
Test pattern
To aid display device setup and optimization, select a test pattern from the drop‑down list.
See ”
Test Pattern“ on page 25 for details.
NOTE: No input signal is needed when using a test pattern for display device setup.
DVS 605 • Using the Default Web Pages 68