Extron Electronics MAV Plus Series User Guide - Manual (Page 154)

Global Presets Page
You can save and recall global presets from the Global Presets page (see figure 100).
Access the Global presets page by clicking the
Global Presets link on the left of the Set
and View Ties or RGB & Audio Settings page.
Figure 100. Global Presets Page
Saving a preset
Save the current configuration (configuration 0) as a preset as follows:
1. Click the Save Preset button.
2. Select the desired preset by clicking on one of the presets listed. To create a new
preset, click one of the
[unassigned] buttons. Overwrite an existing preset by clicking
an already existing preset.
3. If desired, type over the current name in the box adjacent to the Save Preset button.
NOTE: The HTML language reserves certain characters for specific functions (see
Special Characters on page 109.
If you do not rename an unassigned button, the CrossPoint or MAV Plus switcher
names the preset as Preset {next available number}.
If you do not rename an existing preset when it is overwritten, the CrossPoint or MAV
Plus switcher retains the same name.
4. Click the Accept button.
Recalling a preset
To recall a global preset as the current configuration, click the button associated with the
desired preset.
CrossPoint and MAV Series Matrix Switchers • HTML Operation 148