Extron Electronics MAV Plus Series User Guide - Manual (Page 136)

Using the Button-Label Generator Software
1. To run the Button-Label Generator program, click Start > Programs >
Extron Electronics > Button Label Generator > Button Label Generator .
The Button-Label Generator window appears (see figure 80).
Figure 80. Extron Button-Label Generator Window
2. In the Systems selection box, choose the Matrix Switchers 6464 option to match
the button label size and quantities for your CrossPoint or MAV switcher.
3. Using normal Windows controls, you can create and print labels that can be placed in
the label windows on the front panel of the switcher.
NOTE: For best results, print on transparent or translucent material.
4. Click the Clear All Buttons button and create new labels as many times as
necessary to make all of the button labels that you need.
To access the help program, click Help on the menu bar.
CrossPoint and MAV Series Matrix Switchers • Matrix Software 130