Ogram (see – Extron Electronics MAV Plus Series User Guide User Manual
Page 131
Tools menu
Assign
device
icons
— Displays the complete set of input and
output device icons. You can drag any of these icons to the input
and output boxes.
Edit
device
palette
— Allows you to add your own custom device
icon graphics.
RGB
delay
settings
— Displays the switching interval setting for
each input and allows you to change them.
Audio-Input
gain
settings
— Displays the audio gain level setting
for a single input or for all inputs and allows you to change it.
The level is expressed as the magnitude (number of decibels)
and polarity (positive, gain or negative, attenuation) of the audio
adjustment.
Audio-Output
volume
settings
— Displays the audio output level
setting for a single input or for all inputs and allows you to change
it. The level is expressed as a percentage of the input audio volume that is applied to
the output; 0% is full attenuation (audio is silent), 100% is full volume.
Mute-Output
settings
— Displays the RGB Delay, Volume, and Mute Adjust screen,
which allows you to mute and unmute individual or all video or audio outputs.
View
input
frequencies
— (DSVP) Displays the input horizontal and vertical frequencies
for each input.
Update
firmware
— Allows you to replace the switcher firmware without taking the
switcher out of service. See
on page 119.
IP
options
— Allows you to set IP options. See
on
page 115.
HTML
file
manager
— Displays a list of HTML files installed on the switcher and allows you
to upload custom files from a connected PC to the switcher. See
Hardware
status
— Provides the overall status of the matrix switcher, including the primary
and secondary power supply status and the individual voltages, the fan status and
temperature, the rear panel Remote RS-232/RS-422 serial port configuration, and the
installed and updated firmware status (see figure 74).
Green — Proper operation.
Red — Component has failed.
White — Not displayed for the CrossPoint or MAV.
Figure 74.
Status Window
NOTE: Smaller switchers (16 x 16 matrix sizes and smaller) do not show the
power supply and fan status blocks.
CrossPoint and MAV Series Matrix Switchers • Matrix Software 125