YSI IQ S ENSOR N ET DIQ/S 182 XT - Manual (Page 42)

Installation System 182
3 - 22 ba76022e01 12/2011
3.5.3 Mounting under the SD/K 170 sun shield
The SD/K 170 sun shield can be mounted directly on a wall, on a
mounting stand or on a railing. The MR/SD 170 mounting kit is also
required for mounting on a mounting stand or railing.
Note
How to mount the sun shield at the installation location is described in
the instructions for the sun shield or mounting kit.
Materials required  SD/K 170 sun shield (see chapter 11 A
CCESSORIES AND OPTIONS )
 The MR/SD 170 mounting kit is also required for mounting the sun
shield on a mounting stand or railing (see chapter 11 A CCESSORIES
AND OPTIONS ).
Tools  Phillips screwdriver.
Mounting the Universal
Transmitter with the sun
shield
Fig. 3-18 Mounting the Universal Transmitter with the SD/K 170 sun shield
1 Remove the two countersunk screws (pos. 1 in Fig. 3-18) and
swing open the module lid.
2 Position the Universal Transmitter on the sun shield and fix it
into place with the two screws (pos. 2 in Fig. 3-18).
3 Close the lid and fix it with the two countersunk screws (pos. 1
in Fig. 3-18).
2
1