YSI IQ S ENSOR N ET DIQ/S 182 XT - Manual (Page 39)

System 182 Installation
3 - 19 ba76022e01 12/2011
3.5.2 Mounting on a mounting stand with the SSH/IQ sun shield
Materials required  SSH/IQ sun shield (see chapter 11 A
CCESSORIES AND OPTIONS ).
Tools  4 mm set screw wrench
 Phillips screwdriver.
Mounting the sun shield
on a mounting stand
Fig. 3-15 Mounting the SSH/IQ sun shield on a mounting stand
1 Screw the sun shield (pos. 1 in Fig. 3-15) with the four
hexsocket head screws (pos. 2), the washers (pos. 3) and the
clamps (pos. 4) at the required height on the mounting stand
from the back.
2
3
4
1