YSI IQ S ENSOR N ET DIQ/S 182 XT - Manual (Page 30)

Installation System 182
3 - 10 ba76022e01 12/2011
Note
Only use the plastic tapping screws supplied for attaching the contact
base. They ensure the correct fit.
Premounting the ISO
blind nuts
Fig. 3-8 Premounting the ISO blind nuts (variant 2)
5 Attach the contact base (pos. 6 in Fig. 3-7) on the Universal
Transmitter with the two plastic tapping screws (pos. 7).
6 Insert the cheese-head screws (pos. 8 in Fig. 3-8) with the
plastic washers in the drilled mounting holes in the module lid
and loosely screw in the ISO blind nuts (pos. 9).
8
9
MIQ module