YSI IQ S ENSOR N ET DIQ/S 182 XT - Manual (Page 210)

Settings MIQ/CR3; DIQ/CR3
4 - 38 ba76032e01 01/2012
4.7 Checking the status of the outputs
This function offers a simple overview of the states of all outputs of the
combi output module.
For relays, the status open or closed is displayed.
For current outputs, the current value available at the output is
displayed.
With the System 182 XT, you can recall the states of the outputs via the
measured value and status display (see system operating manual of
the DIQ/S 182 XT).
With the 2020 XT system, the function, 394 - Status of output channels,
in the menu, Settings/Service/List of all components can be accessed
as follows:
Fig. 4-20 394 - Status of output channels
1 Call up the measured value display with
m
.
2 Open the Settings menu with
s
.
3 Highlight the Service menu item with
d
and confirm with
g
.
The Service dialog box opens.
4 Highlight the List of all components menu item with
d
and
confirm with
g
.
The List of all components dialog box opens.
5 Select the required component (column Model, entry MIQCR3)
with
d
and confirm with
g
.
The 394 - Status of output channels window opens.
6 Using
m
or
e
, exit the 394 - Status of output channels
window.