YSI IQ S ENSOR N ET DIQ/S 182 XT - Manual (Page 127)

System 182 Outputs
6 - 31 ba76022e01 12/2011
Io 0 ... 20 mA Current value on the
output if the measured
value equals the
Nominal value
ti 0 ... 9999 s Hold-back time:
Integral part of the
controller
(0 = not effective)
td 0 ... 9999 s Reset time:
Derivative part of the
controller
(0 = not effective)
Behavior at error Fixed current value In the case of an error,
the current output
supplies the current
value defined in the
Current with error field
(any in the range 0 ...
21 mA).
Unchanged In the case of an error,
the current on the
output remains
unchanged.
Setting Selection/Values Explanation