YSI IQ S ENSOR N ET DIQ/S 182 XT - Manual (Page 28)

Installation System 182
3 - 8 ba76022e01 12/2011
Stacking the
MIQ modules
Fig. 3-4 Stacking the MIQ modules (variant 1)
Fig. 3-5 Closing the enclosure (variant 1)
7 Attach the prepared Universal Transmitter to the lid of the
MIQ module. At the same time, ensure that the two clips on the
Universal Transmitter click into place in the lid of the
MIQ module. Subsequently, tighten the two screws (pos. 8 in
Fig. 3-3).
8 Close the lid of the Universal Transmitter and fix it with the two
countersunk screws (pos. 7 in Fig. 3-5).
MIQ module
DIQ/S 182
7
MIQ module
DIQ/S 182