YSI IQ S ENSOR N ET DIQ/S 182 XT - Manual (Page 187)

MIQ/CR3; DIQ/CR3 Settings
4 - 15 ba76032e01 01/2012
4.5 Setting the relay outputs
The following steps describe operation with the 2020 XT system. With
the System 182 XT, the outputs of the DIQ/CR3 can be found directly
under the Settings menu (see system operating manual of the DIQ/
S 182 XT).
Fig. 4-15 150 - Settings of outputs and links
1 Call up the measured value display with
m
.
2 Open the Settings menu with
s
.
3 Highlight the Settings of outputs and links menu item with
d
and confirm with
g
. The Settings of outputs and links display
appears.
4 Highlight the Feature column with
d
and confirm with
g
.
5 Highlight a line for a relay output (Rx) in the Feature column
with
d
and confirm with
g
.
The Settings of outputs and links display opens.
6 Highlight the Relay function menu item with
d
and confirm
with
g
.
7 Select one of the functions in the following list with
d
and
confirm with
g
.