YSI IQ S ENSOR N ET DIQ/S 182 XT - Manual (Page 199)

MIQ/CR3; DIQ/CR3 Settings
4 - 27 ba76032e01 01/2012
4.5.8 Sensor-controlled
With the Sensor-controlled function, the relay is controlled by a linked
sensor.
Requirements  For the 2020 XT system, a controller with a software version from
2.80 up is required

Sensor that transmits signals to trigger a cleaning cycle, e.g. UV/VIS
sensor
Settings
Note
Settings of the cleaning process can be done in the Settings of sensors
and diff. sensors menu of the respective sensor.
Setting Selection/Values Explanation
Pulse length Automatic The duration of the air
cleaning process is
programmed in the
sensor.
The relay automati-
cally takes over the
cleaning duration
from the sensor.
0,5 s
1 s
2 s
3 s The relay finishes the
cleaning after the
selected interval.