GE Industrial Solutions AF-650 GP PROFINET - Manual (Page 19)

Illustration 5.2
The GSD file is now imported and will be accessible via the
following path in the Hardware catalogue:
Illustration 5.3
Open a Project, set up the Hardware and add a PROFINET Master system. Select GE FC PN then drag and drop it onto the
PROFINET IO system.
A window for the Device name of the now appears. Type the name into the field. Note that the name must match the
name in EN-08 Host Name. If the checkmark Assign IP address via the IO controller is set, the controller will download the IP
address to the IO device that has the corresponding device name. The IP address is stored in the non volatile memory of
the .
How to Configure the System PROFINET Operating Instruction
18
5 5