GE Industrial Solutions AF-600 FP Lonworks - Manual (Page 29)

Analog Input (X42/1)
Variable
name: SNVT
type:
Value:
nvo109AnIn1 Changeable Min. Max. Resolution:
SNVT_volt 0 V 10 V 0.1 V
SNVT_temp_p -273.15 °C 327.66 °C 0.01 °C
SNVT_lev_percent 0 % 100 % 0,1 %
Analog Input (X42/3)
Variable
name: SNVT
type:
Value:
nvo109AnIn2 Changeable Min. Max. Resolution:
SNVT_volt 0 V 10 V 0.1 V
SNVT_temp_p -273.15 °C 327.66 °C 0.01 °C
SNVT_lev_percent 0 % 100 % 0,1 %
Analog Input (X42/5)
Variable
name: SNVT
type:
Value:
nvo109AnIn3 Changeable Min. Max. Resolution:
SNVT_volt 0 V 10 V 0.1 V
SNVT_temp_p -273.15 °C 327.66 °C 0.01 °C
SNVT_lev_percent 0 % 100 % 0,1 %
These variables contain the value allocated to the analog input terminal X42/1-5 of the (OPCAIO) Analog I/O Option Module. The variable type is changeable with
the commissioning tool.
NB!
This variable is available only if the Analog I/O Option Module (OPCAIO) has been installed in the frequency converter.
Parameter Access Response
Variable name: SNVT type:
nvoParamResponse UNVT_param_response
This output variable is used for the frequency converter access.
A special UNVT has been defined for this variable.
For more information on parameter access, please refer to the How to Access AF-600 FP Parameters section.
AF-600 FP LonWorks
28
5