Ocean Optics Curie UV-VIS Emission - Manual (Page 5)

About This Manual
Document Purpose and Intended Audience
This document provides you with an installation section to get your system up and running. In addition to
Curie installation and operation instructions, this manual also includes information for locating the
OOIBase32 installation instructions (see
Product-Related Documentation ).
Document Summary
Chapter Description
Chapter 1: Introduction Provides a list of system components, and
operating requirements. Also contains
instructions for connecting the Curie system to
a PC.
Chapter 2: Configuration Contains instructions for configuring the Curie
system with the OOIBase32 application
software.
Chapter 3: Using the Curie System Contains instructions for performing
experiments using the Curie system.
Chapter 4: Troubleshooting Provides a list of possible problems that you
may encounter when using your Curie system
and suggested solutions.
Appendix A: Specifications Provides product specifications for the Curie
system.
Appendix B: Calibrating the Wavelength of the
Curie Spectrometer
Provides instructions for calibrating the
wavelength of the Curie system.
Appendix C: Relative Irradiance Mode Contains information about Relative Irradiance
Mode.
Appendix D: Filter Sets Contains specifications for the filters supplied
with the Curie.
Product-Related Documentation
• OOIBase32 Spectrometer Operating Software, Operating Instructions
• Correcting Device Driver Issues
• External Triggering Options
640-11100-000-02-0406 iii