Ocean Optics Curie UV-VIS Emission - Manual (Page 21)

2: Configuration
3. In the
External Trigger Mode field, select None to disable the pushbutton, and click OK.
4. Push the pushbutton on the Curie. The pushbutton is now inactive.
Note
If you are unable to access the menu after clicking on it, push the pushbutton on the Curie
and try accessing the menu again.
Turning on the Light Source
There are two ways that you can turn on the lamp using OOIBase 32 software:
• Method 1: Check the Strobe Enable box on the Strobe tab in the Configure Data Acquisition
screen.
► Procedure
1. Select Spectrum | Configure Data Acquisition from the menu or click the Data Acquisition
button ( ). The Configure Data Acquisition screen appears.
2. Select the Strobe tab.
3. Check the Strobe Enable box.
640-11100-000-02-0406 15