beautypg.com

Operating requirements, Recommended additions, Installing ooibase32 software – Ocean Optics Curie UV-VIS Emission User Manual

Page 10

background image

1: Introduction

‰

Software and Technical Resources CD: Each Curie system order comes with Ocean Optics’
Software and Technical Resources CD. This CD contains all Ocean Optics software and manuals
for software operation, spectrometers, and spectroscopic accessories.
Documentation is provided in Portable Document Format (PDF). You need the Adobe Acrobat
Reader (version 6.0 or higher) to view these files. The Adobe Acrobat Reader is included on the
CD and will install automatically (if needed) when you attempt to view a document.

With the exception of OOIBase32 Spectrometer operating software, all Ocean Optics software is
password-protected. Passwords for purchased software are located on the back of the Software
and Technical Resources CD
package.

Operating Requirements

You must have the following components to use the Curie Fluorescence System:

‰

Ocean Optics Curie Self-contained Fluorescence System and included accessories (including the
12 VDC power supply)

‰

Windows-based PC with USB connectivity

‰

USB device cable (included)

‰

OOIBase32 operating software (included)

Recommended Additions

The following products, available from Ocean Optics, are recommended additions to your system:

‰

Tungsten light source enabling relative irradiance measurements (LS-1-LL)

‰

PS-HG1-ADP cuvette adapter for LS-1-LL for performing in-house relative irradiance
measurements

‰

Fiber Optic Cable ( QP50-2-VIS/NIR) for performing in-house relative irradiance measurements
and wavelength calibration

‰

HG-1 Mercury Argon Calibration Source for Curie wavelength calibration

‰

Annual Service Package (ASP)

Installing OOIBase32 Software

Caution

Do NOT connect the Curie System to your PC until after you have installed the
OOIBase32 software. Follow the instructions below or in the OOIBase32 manual
(see

Product-Related Documentation

) to properly connect and configure your system.

Procedure

To install OOIBase32 software,

1. Close all other applications running on the PC.

4

640-11100-000-02-0406