Ocean Optics Curie UV-VIS Emission - Manual (Page 20)

2: Configuration
Note
If you do not enable the Autoincrement Filenames function, a save file dialog box will
open every time you push the button (if enabled) or choose a save command.
► Procedure
To configure the Autoincrement Filenames function, do the following:
1. Select
File | Autoincrement Filenames | Enabled from the OOIBase32 menu to enable the
feature.
2. Select File | Autoincrement Filenames | Show Name to enable the Show Name option. When
you enable both this option and the Autoincrement Filenames option, the filename of the next
saved file displays in the title bar of OOIBase32.
3. Select File | Autoincrement Filenames | Configure to configure the following parameters:
a. Base name for autoincremented files.
b. Starting index for autoincremented files. For example, if you enter “1” here, the number
in the saved filename will appear as 00001. The next saved file will have 00002 in the
filename, etc.
Disabling the Pushbutton
► Procedure
To disable the pushbutton feature,
1. Select
Spectrum | Configure Data Acquisition from the menu or click the
button. The
Configure Data Acquisition screen appears.
2. Select the
External Trigger tab.
14 640-11100-000-02-0406