B&B Electronics ESR904 - Manual - Manual (Page 37)

Using ESP Manager
Manual Documentation Number: ESR90x-5012m Chapter 4 27
B&B Electronics Mfg Co Inc – 707 Dayton Rd - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Exit

Allows you to Exit the ESP Manager program
Help

Accesses the About vcomui dialogue box, which indicates the software
version number
Server Icons Pane
Firmware Upgrade , Virtual COM Configuration , Searching Server ,
Uninstall Virtual COM and Monitor Port Status can also be selected using
icons located in the left window.
Serial Server / Virtual COM Lists
To make management of lists of serial server easier, lists can be sorted by
clicking on any tab heading. Scrolling bars facilitate scrolling through long
lists.
Serial Server List

Server Name - Displays the name of the Serial Server. The name is
listed once for each port.

IP Address - Displays the IP Address for the Serial Server. All ports in a
Serial Server have the same the same IP address.

Protocol - Displays the currently selected TCP or UDP mode for the
Serial Server .

Port - Displays the port number for each Serial Server port.

COM Name - Displays the name of the computer COM port mapped to
each Serial Server port. If no computer port has been mapped it displays
Not mapped.

Status - The Status indicates the mapped virtual COM port condition.
o
Not Connected is shown when a program does not have the
port Open.
o
Connected is shown when that mapped port is Open for use.
Virtual COM List

COM Name - Displays the number of the COM port mapped to each
Serial Server port.

IP Address - Displays the IP Address for the Serial Server. All ports in a
Serial Server have the same IP address.