B&B Electronics GW-7553 - Manual - Manual (Page 68)

GW-7553 PROFIBUS/Modbus TCP Gateway User Manual (Version 1.00, Dec/2008) PAGE: 68
Figure 69 The menu of safe value setting
The window of “Safe Value Setting” divided into 6 parts to explain, as shown in
1) Select module:
ct check box of the module to know memory address
uble click left button of mouse at the value of DI/DO to change
ll set to H” button to set all of DI/DO to “H” and click “All
ouble click left button of mouse at the value of AI/AO to change
ll set to F” button to set all of AI/AO to “0xFFFF” and click
from file、(3)Load from device, as shown in figure 69.
figure 70.
(
The user can sele
configuration of the module for set safe value of the module.
(2) DI/O table:
The user can do
the value from “H” to “L” or “L” to “H”.
(3) All DI/O setting:
The user can click “A
set to L” button to set all of DI/DO to “L”.
(4)AI/O table:
The user can d
the value into 0x0000~0xFFFF.
(5) All AI/O setting:
The user can click “A
“All set to 0” button to set all of AI/AO to “0x0000”.