B&B Electronics GW-7553 - Manual - Manual (Page 50)

Step 3: Set the parameters of the GW-7553. We need to change “Modbus
Type” to Slave and “Modbus Format” to Modbus TCP. The default
setting is being used in the other parameters for this example. Please
refer to section 4.3 the Configuration of the common parameters.
The users can set parameters as shown below.
Figure 47 Double click the GW-7553 icon to open the
“Slave configuration” window
Figure 48 Click “Parameter Data…” button to open the
“Parameter Data” window
GW-7553 PROFIBUS/Modbus TCP Gateway User Manual (Version 1.00, Dec/2008) PAGE: 50