B&B Electronics GW-7553 - Manual - Manual (Page 63)

GW-7553 PROFIBUS/Modbus TCP Gateway User Manual (Version 1.00, Dec/2008) PAGE: 63
5.2 Utility introduction
By this utility, the user can understand the module address of PROFIBUS、
Modbus and the GW-7553. The utility also support users set safe value and
network setting easily. It introduces main window of the utility first as shown in
figure 64.
Figure 64 Main window of the utility
Main window of the utility has 6 parts, they are (1)Menu、(2)COM Port
settings、(3)Module state、(4)Module parameters、(5)Connection status of GW-
7553 and COM Port、(6) Status bar, as shown in the below.
5.2.1 Menu：
1. Communication =>
a. Connect：Open COM Port and connect with the GW-7553
b. Disconnect：Close COM Port and disconnect with the GW-7553
c. Exit：Exit from the utility
2. IP Setting =>
a. New Setting：Open a new IP setting.
b. Load from file：Load a IP setting from the file.
c. Load from device：Load a IP setting from the GW-7553.