B&B Electronics GW-7553 - Manual - Manual (Page 27)

Figure 27 Multi-master system
4.2 GSD file
The characteristic (ex: baud rate, message length, number of input / output data.....)
of each PROFIBUS DP device is described in the GSD file. The GSD file of the
GW-7553 is in the ICP DAS companion CD-ROM (PATH--> CD:
\profibus\gateway\gw-7553\gsd\). The user can copy GSD file ( IPDS0C0D.gsd )
and the Bitmap file ( ICP_7553.bmp,GW_7553.bmp ) to the PROFIBUS
configuration tool.
4.2.1 The example of how to load GSD file
In the following examples the CIF50-PB PROFIBUS Master card from Hilscher
is used. The configuration and communication is done by the program “SyCon”
provided by Hilscher.
Step 1: Copy the GSD file (IPDS0C0D.gsd) and the Bitmap file
(ICP_7553.bmp,GW_7553.bmp) from CD of the GW-7553 module
into the PROFIBUS configuration tool.
GW-7553 PROFIBUS/Modbus TCP Gateway User Manual (Version 1.00, Dec/2008) PAGE: 27