Olympus IX2-DSU BX-DSU - Manual (Page 71)

ASSEMBLY
/ Installation of UV-cut plate
II. DSU
II . 8 - 1 7 Page
8-15 Installation of UV-cut plate
8-15-1 In case of BX
1. Put UV-cut plate underneath the front side mirror turret as illustrated.
8-15-2 In case of IX
1. Loosen fixing knob (1) for UV-cut plate.
2. Put the UV-cut plate in receptacle of lens barrel of microscope frame as
illustrated.
3. Turn fixing knob to fix firmly.
8-16 Installation of filter or shutter (In case of U-FWR or IX2-SHA)
1. Loosen fixing screws (1) that fix lamp house mount adapter at two
places and remove the lamp house mount adapter.
2. Insert filter or shutter (2) that you are going to use into mount (3) and
tighten fixing screws (1) at two places.
3. Insert lamp house mount adapter into filter wheel or shutter (2) that you
are going to use and then, tighten fixing screws (4) at two places.
Installation of LAMBDA 10 and Ludl filter is the same as
described above.
(2) (3)
(4) (1)
TIP
(1)