Olympus IX2-DSU BX-DSU - Manual (Page 33)

DETAILS OF EACH OPERATION
/ Changeover of visual mirror unit (front side)
II. DSU
II . 3 - 9 Page
3-7 Changeover of visual mirror unit (front side)
3-7-1 In case of BX
Turn turret (1) located in front of light illuminator and insert mirror unit
desired or reference mirror into light path. Reference mirror to insert into
light path is normally put in No. 1 for use of camera observation.
In case that mirror unit name is put in a pocket of identifying
plate (2) of microscope frame, you can verify the name of mirror
unit.
When you insert reference mirror put in No.1 into light
path, verify that rear side turret is set to fluorescent mirror
unit.
3-7-2 In case of IX
1. Look at mirror unit indication (1) on surface of mirror unit cassette or
look at indication (2) at right side of turret and verify mirror unit
number that is currently inserted into light path.
In case that mirror unit name is put in a pocket of
identifying plate (3) of microscope frame, you can verify
the name of mirror unit.
2. Turn turret (4) so as to bring number of mirror unit that is to be used
in indicator of mirror unit cassette (1) or (2) and fix it at click position.
Reference mirror to insert into light path is put in No. 1 for use of
camera observation.
Turning turret in [+] direction, the number changes in
order of "1→2→3→4→5→6→1", and in [−] direction, it
changes in order of "1→6→5→4→3→2→1".
When you insert reference mirror put in No.1 into light
path, verify that rear side turret is set to fluorescent
mirror unit.
(1)
TIP
TIP
(1)
(2)
(3) (4)
TIP
(2)
Note
Note