M&C TechGroup MP-F10_R Operator's manual - Manual (Page 12)

12 Gas sampling and gas conditioning technology 10.1a-ME
Figure 5 Turning the pump head
11.4 SUPPLY CONNECTIONS
11.4.1 ELECTRICAL CONNECTIONS
When making the electrical installation the safety regulations must be observed. In particular make
sure that the electricity supply is isolated before trying to connect the pump.
D A N G E R !
The bellows pumps MP F.. are not allowed to be operated in explo-
sive environments!
W A R N I N G !
Incorrect voltage can destroy the device.
When connecting the equipment, please ensure that the supply
voltage is identical with the information provided on the model type
plate. The supply voltage is only allowed to deviate max. 5 % and
frequency 2% from the indication on the model type plate.
Exceeding the tolerance increases the heating and influences the
electromagnetic compatibility.
The air-cooled motor is designed for an ambient temperature range
of -20 to +40°C as well as an installation altitude of
< 1000 m above mean sea level.
Flange screws