EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 58)

XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.D
51
3.14.4 GPI
S
OUT D
EFINITION
ngs p.8.3
pe
----------
2[F2]------------ [F6]------------
Up [F0]PgDn
GPI OUT Setti
GPI# Function Ty
1[F1]------------ [F5]--
3[F3]------------ [F7]------------
4[F4]Replace [F8]Open Pulse
[Menu]Quit [Clr+F_]Dft [F9]Pg
The GPIs OUT have been implemented primarily for the Replace function. On the
ger GPIs OUT.
as the possibility to define the following
rameters:
The function that will trigger a GPI OUT: (Empty) not used (default value) or
Replace
es are:
o
Open-Low
ly:
IN IN and OUT OUT
After the
OUT
IN/OUT point when executing the Replace, users can trig
For each GPI output, the operator h
pa
•
• The type of GPI signal that will be used. Possible valu
o
Open-Low Pulse
o
Close-High
o
Close-High Pulse
Example
Users can select all types of GPIs. The behavior varies according
Before the On Replace Between IN On Replace
Close-
High Low High High Low Low
Open- High Low
Low
Low High High
Close- Low High Pulse Low High Pulse Low
High
Pulse
Open-
High Low Pulse High L
Low
Pulse
ow Pulse High