EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 27)

Issue
10.03.D XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
20
2.5.3
O
M
ODIF E OF
TTL GPI
S
To modify the type o , pro
1. Press the TAB key to select th
2. Press the LEFT and RIGHT AR e value.
Depending on the ty the
GPI section to the other.
For more information on the GPI
settings in the Setup menu chapter of the Multicam user manual.
2.5.4 T
A
P
LAYLIST
I
NTRODUCTION
Tally feature allows
camera perform ector’s cut and to add all the clips to a playlist.
hen the
H
OW TO UNCTION
You will set up the Tally function on page 4 of the Setup Configuration.
To set up the tally function, proceed as foll ws
1. Press the TAB ct the Tally f
RIGHT ARROW o set the Tall func
2. In the Add cli d, specify e
want to add the tally clips.
3. In the Clips g field, speci h
in seconds.
e GPIs I
elect the
• define the ‘Mark Tly’ function on this GPI IN
nction
marked train (for ex. cam a). When a
second ‘Mark Tally’ GPI is received on a different record train (for ex. cam b), the
server marks an OUT point on the first record train (cam a) and an IN point on the
second record train. All the clips created this way are added to the defined
playlist.
H
OW T Y THE
T
YP
f TTL GPIs ceed as follows:
e field on the first line of Page 4.
ROW keys to change th
pe defined, lines 5 to 8 will automatically move from one
IN settings, refer to section on the GPI IN
U
SING THE LLY
F
UNCTION TO
C
REATE A
D
IRECTOR
’
S
C
UT
The
of the users to automatically create a clip for each change
ed on the dir
The clips are created automatically by the server as it receives GPIs
switcher w IN from a
director changes the camera angle.
S
ET UP THE
T
ALLY
F
o :
key to sele
keys t
ield value and press the LEFT and
tion to ‘ON’. y
ps to PL fiel th LSM ID of the playlist to which you
uardbands fy ow much the guardbands should be
4. In th
• s
N section, for a given GPI,
REC on which the director’s cut is performed
The tally fu
IN point is is now active: When the server receives a ‘Mark tally’ GPI, an
on the corresponding record