EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 22)

XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.D
15
2.4 SMPTE 334M PACKETS MANAGEMENT
(PAGE 3
In Multicam, ancillary data packet in the vertical ancillary data space in HD and
SD signals are
rted, as de ype 2
ANC packet).
)
suppo fined in the SMPTE standards 334M, 291M (t
A
CTIVATE
up
access the SMPTE 334M Packet Management section.
n o
You can turn on/off the SMPTE 334M packet encoding for each player channel.
P
ACKETS SUPPORTED
Up to now, SMPTE 334M data packets carried on the chrominance (C) data stream
within the SMPTE 292M signal a
In Multicam, all DIDs mentioned in the SMPTE 334M standards are supported:
• 61 О 62
• 40 О 5F
• C0 Î DF
Those DIDs are saved and restored on the output channels on their original lines.
/ D
EACTIVATE
VANC D
ATA PACKET SUPPORT
In the Set Configuration module (SHIFT + F2), press PAGE DOWN until you
You can tur n/off the SMPTE 334M packet decoding for each record channel.
re not decoded (HD).