EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 39)

Issue
10.03.D XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
32
3.7 OSD SETTINGS
OSD Settings p.1.1
[F1
[F2
]G
]D
]C
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
enlock Error Msg : Yes
isk Error Msg : Yes
[F4
ue number on OSD : Yes
3.7.1 G
ENLOCK
E
RROR
M
SG
Possi
s f n the output monitor.
If Genlock reference is not correct, the “!GkV” message appears on the output
monitor.
3.7.2
ISK
E
RROR
M
SG
on the output monitor when a disk
ble values: Yes (default) / No
Thi unction enables or disables the Genlock information o
D
Possible values: Yes (default) / No
This function displays an error message ”!Raid“
is faulty.
Note
that the
f one disk
rs on all
tor shuts
The server is equipped with a RAID disk array. This means
operation can continue seamlessly even with one faulty disk. I
is disconnected during operation, the “!Raid” message appea
output monitors, and another message appears when the opera
down the application, to invite him to replace the disk and rebuild the
RAID array.
Refer to the Technical Reference manual for details on the RAID system
and its maintenance.
3.7.3
Possible values: Yes (default) / No
When set to ‘Yes’, the cue number is displayed on the OSD of the output monitors
when a cue point is recalled inside a record train.
C
UE
N
UMBER ON
OSD