EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 47)

Issue
10.03.D XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
40
3.9.8 R
ECEIVE
P
AGE
e or more clip pages from 1 to 10. Default: p.5
u by
(s)
ator
stored, proceed :
ge e PUSH
pa
ress the F_ key corresponding to the page number you want to
select/unselect a
lected pa
F_ keys light red en.
s ENTER to
Clips p.3.4
Possible values: Select on
This parameter specifies the page of your machine where clips sent to yo
other network operators using the PUSH function must be stored.
How to Specify PUSH Receive Page
To specify the page(s) to which the clips pushed from another network oper
will be
as follows
1. In the 2 n d pa
Receive Page
of Clip parameters, press the F5 key to edit th
rameter.
2. P
The se
s PUSH Receive Page.
ges will be highlighted on the LCD and the corresponding
. F_ keys of unselected pages light gre
3. Pres validate your selection.
[F1]PLST receive
0
Status
]Dft [F9]PgUp [F0]PgDn
Pg: 1 2 3 4 5 6 7 8 9 0
[F6]Reset Archive
[Menu]Quit [Clr+F_
3.9.9
This function allows the operator to automatically create a copy of all clips when
copying a playlist. In this setting, you need to select the page(s) of your machine
where clips received when using the PLST+CLIPS copy function must be stored.
Refer to the description of the Playlist copy function for details. Clip pages can be
assigned simultaneously as PUSH and PLST Receive Pages.
3.9.10 R
ESET
A
RCHIVE
S
TATUS
Pressing F6 will reset the archive status of all clips present on the system. A
confirmation is required. Refer to the description of the Archive function for
details.
PLST
RECEIVE
P
G
Possible values: Select one or more clip pages from 1 to 10, default: page 10 (0).