EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 45)

Issue
10.03.D XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
38
3.9.3 A
UTO NAME CLIPS
Possible values: Disable (default) / TC IN / CAM Name / ID Louth / VarID 32
If this function is enabled, the value of the selected field will automatically be
.
can be used to automatically name clips:
en it is created.
used to name the clip upon creation
The values from the following fields
Value Meaning
Disabled (Default) No name is assigned to a clip wh
TC IN The timecode of the IN point of the clip is automatically
en it is created. assigned to a clip wh
CAM Name The name of the recorder chann
assigned to a clip when it is created. el is automatically
ID Louth The ID Louth of the clip, that is a unique identifier for the
lip, is assigned to a clip when it is created (used mostly
ith a XNet network not available with XTnano).
c
w
VarID 32 The VarID 32 of the clip is assigned to a clip when
created. it is
ited to the first 8 characters
of this field.
When this option is selected, the VarID 32 used to assign
a name to the clip will be lim
3.9.4 C
LIP P
Possible range: 00s00fr to 30s00fr. Default: 02s00fr.
When th -roll function is enabled from the secondary clip menu, the clip will
play through its OUT point for a duration defined by the Post-roll parameter. This
is a o
“Freeze”
OST
-
ROLL
e Post
ls valid inside record trains if the Record Train OUTs parameter is set to
.