7 record train outs, 8 freeze on cue points, 9 internal loop mode – EVS XTnano Version 10.03 - July 2010 Configuration Manual User Manual
Page 42: Record train outs, Freeze on cue points, Internal loop mode, Ecord train, Reeze on cue points, Nternal loop mode

XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.D
35
3.8.7 R
ECORD TRAIN
OUT
S
Possible values: Play Through (default) / Freeze
OUT point is marked in a record
nt and automatically freeze on that
or on that picture + the Post-roll
en replaying that section.
Multicam will still countdown to the
n a clip, Multicam always
ation when Post-roll mode
3.8.8 F
REEZE ON CUE POINTS
e on OUT point functionality but because it will be done on cue
point, you will be able to freeze on any field (impossible with OUT points).
where cue points have been marked, the playout
the parameter is set to “Yes”. It plays through if the
parameter is set to “No”.
When this parameter is set to “Freeze”, and an
train, Multicam will countdown to the OUT poi
)
picture (if the Post-roll mode is disabled
uration (if the Post-roll mode is enabled) wh
d
When the parameter is set to “Play Through”,
OUT point, but will keep playing through this point. I
eezes on the OUT point (or OUT point + Post-roll dur
fr
is enabled).
Possible values: No (default) / Yes
The purpose of this functionality is to allow marking cue points on any field of a
record train and freeze on the cue point when the playback reaches it. This is
similar to the freez
When playing record trains
freezes on the cue point if
The Post-roll parameter is not taken into account for this functionality.
Record Trains p.2.3
[F1]Internal loop mode : Video+Audio
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.8.9
s: Video+Audio (default) / Video only
This parameter defines which components of PGM1 output must be recorded back
into the server when the Loop mode is engaged.
•
Video+Audio: Both video and audio signals of PGM1 are recorded back into
CAM A input.
•
Video only: Only the video signal of PGM1 is recorded back into CAM A input.
This allows the operator to continue the record of live audio tracks during the
Loop process. This can be useful to add music, voice or live sound to an edit
for example.
I
NTERNAL LOOP MODE
Possible value