EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 15)

Issue
10.03.D XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
8
Value Meaning
Svr Clip pages and banks can be selected independently on
VGA and remote, but connecting to the clips of a network
machine or coming back to the clips of the local machine
on the VGA or Remote Panel will automatically reflect on
the other (same effect as ‘No’ on XTnano).
2.2.8
HANNEL
N
AMES
characters max.). The name of record
he video output monitor when a record
train is loaded, displayed on the E/E monitoring outputs and can also be used to
2.2.9 G
ENERAL
T
IMECODE
S
ETTINGS
of timecode they want to use as
ords with timecodes of video material
in the table each time a jump in
sed on all searches for and
o timecode jump tables are filled with the following data:
• The first table is always filled in with the LTC timecode. This is the timecode
defined on or plugged into the server.
• Th s
be one
o
LTC and VITC (default) timecodes in SD
C
Play and record channels can be named (12
channels will be displayed on the OSD of t
name clips automatically when the Autoname clip parameter is set to “CAM
name”.
The name of the player channel will be displayed on the OSD, but truncated to 4
characters.
From Multicam version 9 onwards, the management of timecodes has been
improved. The users can now choose which type
the reference to work on a given recorder of a server. This is made possible by
the management of two timecode jump tables.
T
IMECODE
S
ETTINGS
The timecode jump tables contain rec
recorded on the server. A new record is created
timecodes is detected on the recorded material.
The records of timecode jumps allow the identification of all the recorded
material. The timecode jump tables are u
manipulations of video material recorded on a server.
The tw
e econd table is filled in with the timecodes selected by the user. This can
of the following timecode type:
o
LTC, HANC LTC (default) or HANC VITC in HD