EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 54)

XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.D
47
[F3]VGA & RMT Sync : No
4]PGM/PRV Mode : Enable
EVS Controller p.6.2
[F1]Record key : Start REC + Live
[F
gDn [Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]P
3.12.7
ssible values: Start REC + Live (default) / Live
is parameter changes e RECORD key on the remote:
ORD key starts the record process and
switches to LIVE mode.
T S
YNC
and bank
Value Meaning
, page and bank can be selected independently on
the VGA screen and on the EVS Remote Panel.
R
ECORD KEY
Po
Th the function of th
• Start REC + Live: Pressing the REC
• Live: Pressing the RECORD key only switches to last recorded picture, but the
record is not restarted if it has been previously stopped by the operator.
3.12.8 VGA & RM
Possible values: No, Yes, Server Nbr
This parameter selects whether and how the current clips machine, page
of VGA screens and EVS Remote Panel must be synchronized.
No (Default) Clip machine
Yes Clip machine, page and bank are synchronized between VGA
screen and EVS Remote Panel. Connecting to the clips of a
network machine or coming back to the clips of the local
machine, or selecting a new page or bank on one side will be
automatically reflected on the other.
Server Nbr Clip pages and banks can be selected independently on VGA
and remote, but connecting to the clips of a network machine
will automatically reflect on the other (same
effect as ‘No’ on XTnano).
or coming back to the clips of the local machine on the VGA or
Remote Panel