EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 12)

XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.D
5
2.2.3
You can also define the OSD settings on page 1.1 or 5.1 of the setup menu on the
find a description of these settings in the Multicam user
alues: Yes (default) / No
This function enables or disables the Genlock information on the output monitor.
nce is not correct, the “!GkV” message appears on the output
Possible values: Yes (default) / No
This function displays an error message “!Raid” on the output monitor when a disk
is fa lty
OSD S
ETTINGS
Remote Panel. You will
manual.
G
ENLOCK ERROR
Possible v
If Genlock refere
monitor.
D
ISK ERROR
u .
Note
The server is equipped with a RAID disk array. This means that the
operation can continue seamlessly even with one faulty disk. If one disk
is disconnected during operation, the “!Raid” message appears on all
e him to replace the disk and rebuild the
RAID array.
h Ref Hardware manual for details on the RAID
ce.
output monitors, and another message appears when the operator shuts
down the application, to invit
Refer to the XTnano Tec
system and its maintenan
A
UDIO METERS ON
OSD
Possible values: Yes (default) / No
he display of audio meters at the bottom of each
Possible range: -83.2 dB to 0 dB. Default 0 dB
ting the sensitivity of audio meters on the OSD of the
alue means that the meters will be more sensitive.
This parameter enables/disables t
output monitor.
A
UDIO METERS ADJ
.(
DB
)
This parameter allows adjus
output monitors. A positive v