EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 41)

Issue
10.03.D XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
34
p.2.2
: 05s00fr
[F2]Default clip duration : 04s00fr
3]Mark cue points : Live
s00fr
ay Through
No
Up [F0]PgDn
Record Trains
[F1]Guardbands
[F
[F4]Preroll : 02
Pl [F5]Record train OUTs :
[F6]Freeze on cue points :
Menu]Quit [Clr+F_]Dft [F9]Pg [
3.8.3
nge 0 r Default: 05s00fr
of saved ‘guardband’ before and after the clips.
3.8.4
alues: Disable, or from 00s01fr to 4h. Default: 04s00fr
This option allows the user to set the duration of clips created with only IN point
set to ‘Disable’, both IN and OUT points are required to
nute granularity from 1 minute up to 4 hours.
3.8.5 M
ARK CUE POINTS
Possible
Live: m
Playbac
main pla
3.8.6 P
REROLL
fault: 0s05fr
Pre-roll duration used when recalling a cue point.
G
UARDBANDS
Ra : from 00s00fr to 60s0 f .
This option specifies the amount
D
EFAULT CLIP DURATION
Possible v
or only OUT point. When
be able to create a clip.
The duration can be set:
• With second granularity up to 1 minute.
• With mi
values: Live (default) / Playback
emorizes cue points based on the timecode of the LIVE input.
k: memorizes cue points based on the timecode of the field loaded on the
y channel.
Range: from 0s01fr to 5s00fr. De