10 playlist settings, 1 video effect duration, 2 wipe type – EVS XTnano Version 10.03 - July 2010 Configuration Manual User Manual
Page 48: 3 default plst speed, 4 insert in playlist, Playlist settings, Video effect duration, Wipe type, Default plst speed, Insert in playlist
XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.D
41
3.10 LAYLIST SETTINGS
5]Insert in playlist : After
[F6]Confirm Ins/del clips : No
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
P
p.4.1
Playlist
[F1]Video effect duration : 00s10fr
[F3]Wipe type : Vert. L>R
[F4]Default plst speed : Unk.
[F
3.10.1
ATION
fault: 00s10fr
ition effect. The specified
value is used as default value in Playlist Edit mode. Note that the duration of the
own
3.10.2 W
IPE TYPE
t. L>R (default) / Vert. R>L
This parameter specifies the vertical wipe effects from Left to Right or from Right
3.10.3
ed for clips entered into playlist. “Unknown”
IN PLAYLIST
/ Before
:
V
IDEO EFFECT DUR
Possible range: 0s00fr to 20s00fr. De
This parameter sets the duration of the video trans
video transition when using the TAKE button in 1Pgm+Prv mode has its
parameter in another section of the Setup menu.
Possible values: Ver
to Left.
D
EFAULT PLST SPEED
Possible values: Unk. (unknown - default), or from 0% to 100%
This defines the default speed us
means that the speed of the previous clip in the playlist will be used as a
reference for the current clip. 0% will force the playlist to pause at the end of the
previous clip.
3.10.4 I
NSERT
Possible values: After (default)
This setting defines how the Insert function of playlist will be performed
depending on the value specified in this setting, the new clip will be inserted after
or before the current clip in the playlist.