EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 30)

XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.D
23
The XNetMonitor will use the LAN IP connection to transfer the monitoring data.
2.7.2 S
ETTINGS
D
ESCRIPTION
oard con ection settings are described in the table below:
IP Address Specifies the IP address to connect to the port 1 of the
The MTPC b n
Port #1
MTPC board on the server. The IP addresses 0.0.0.0 and
255.255.255.255 are not allowed.
Subnet Mask Specifies the range of logical addresses within the address
space assigned to the MTPC board connection.
Default Gateway Specifies the IP address of the router on the XNet network
that the MTPC board can use as an access point to external
networks.
The
Note
ed
he
bottom right of the screen and press ENTER to apply the modifications.
modifications of parameter values in this screen are not appli
when you leave the field. You need to select the APPLY option at t