AASTRA 4422 IP Office for MD Evolution User Guide - Manual (Page 54)

Call Forwarding Services
MD Evolution – Dialog 4422 IP Office 54
Usually, you will dial one of the following:
61 To activate an immediate call forward.
62 To activate a call forward on no-answer condition.
63 To activate a call forward on busy condition.
69 To activate a call forward on no-answer condition and busy
condition.
64 To activate a Do not disturb call forward
In the first four cases:
FWD NO
z
Then dial the internal or external number that will be the
recipient of your call forwards.
As previously indicated, the recipient’s number may contain up to
18 digits, including the network access prefix. An external number
may be one that is accessible through abbreviated dialling.
In all cases: Â
Now press the loudspeaker key on your extension to confirm
your settings.
This will have the effect of activating your new settings, and your
extension will then display the “Accepted Service” message and
give the corresponding tone.
í
Next, press the C (or Clear) key on your extension.
Your extension returns to idle status.
The variable call forward that you have just defined is effective
immediately.
Call-Fwd
Ц Ф
Activating this service will also cause your extension’s Call-fwd key
to flash.
Note: The various 61, 62, 63, 64 and 69 prefixes are
usually used to activate a call forward. They may, however,
have been modified by your system administrator.
15:49 05 jun 2008
Enter number: 61xxx
ALL CALL FORWARD A
WESSON Paul
407