Silent ringing function – AASTRA 4422 IP Office for MD Evolution User Guide User Manual
Page 25

25
MD Evolution – Dialog 4422 IP Office
Operations for Incoming Calls
Â
Press the Loudspeaker key on your extension.
You are now directly connected to the party calling the other
extension.
Notes:
The prefix “13” is the one usually used to access the call
pick-up service. It may, however, have been modified by
your system administrator.
Rather than dialling the number of the extension to pick-up,
you may also press the repertory key where this number
may have been saved.
Your extension may also be subject to call pick-ups from
third party sets.
Certain extensions (such as yours) may possibly be equipped
with permanent protection against call pick-up. If this is the
case, this service will obviously be refused on these exten-
sions (and vice-versa).
Silent Ringing Function
This function may be used when you wish to not be disturbed by
the ringing of the telephone. When it is activated only your extension’s
screen display and the flashing of a line key will advise you of a new
incoming call.
To activate this function from an idle extension:
É
Press this key to activate silent ringing for incoming calls.
The associated LED will remain lit to remind you that this function is
activated.