AASTRA 4422 IP Office for MD Evolution User Guide - Manual (Page 31)

31 MD Evolution – Dialog 4422 IP Office
Operations for Outgoing Calls
Automatic Call-Back on Busy Condition
When placing a call to an internal party whose extension is busy
and you would rather not wait on the phone, you may activate the
automatic call-back on busy condition for the called extension.
This if valid regardless of your called party’s status: “RING”,
“WAIT”, “BUSY” or “CONGESTED”. To do so:
1
z
Simply dial the suffix “1”, assigned to the automatic call-back
service.
You will receive both visible and audible confirmation for registering
automatic call-back for your call: “REGISTERED CALLBACK” will
be displayed on your screen, and the service acceptance tone will
be played. d
or
í
Hang up the handset or press the “C” (Clear) key to end a call
placed using the loudspeaker monitoring function.
You will be automatically called back when your called party’s con-
versation has ended.
Then, once you have answered this call-back, your internal called
party will be automatically re-rung.
Note: The suffix “1” is the one usually used to access the
automatic call-back service. It may, however, have been
modified by your system administrator.
WAIT
WESSON Paul
407
Automatic callback